Washing Machine Heating Element (Boiler) Replacement in Mersin – Prices & Service

Quick Answer

A washing machine heating element (rezistans) replacement in Mersin costs ₺350–₺600 including parts and labour, depending on the brand and model. Usta Hemen replaces washing machine heating elements across Mersin same-day. Call (0 551) 711 93 55.

Introduction

When your washing machine runs through a full cycle but the laundry comes out cold — or when it trips the circuit breaker every time you select a hot wash — the heating element is almost certainly the culprit. This is one of the most common appliance repairs in Mersin, and one of the most cost-effective: replacing a heating element extends your machine's life by many years at a fraction of the cost of a new machine.

Usta Hemen's appliance repair technicians carry heating elements for the most popular washing machine brands sold in Turkey and can usually complete the repair on the first visit.

What Is the Washing Machine Heating Element?

The heating element (also called the "boiler" or rezistans in Turkish) is a U-shaped or tubular stainless steel element, typically 1,500–2,500 watts, immersed in the drum's sump. When you select a warm or hot wash (40°C, 60°C, 90°C), the control board energises the element to heat the wash water.

Most washing machines in Turkish homes operate on 230V single-phase supply. The heating element draws 6.5–11 amps and should always have a dedicated or protected circuit.

Signs Your Washing Machine Heating Element Has Failed

| Symptom | Likely Cause | |---------|-------------| | Laundry comes out cold on warm/hot cycles | Element has failed (open circuit) | | Circuit breaker trips on hot wash cycles | Element has a short to earth | | Burning smell during operation | Element or wiring to element burning | | Error code on display (E1, F05, etc.) | Thermistor or element fault | | Very long cycle times | Element is partially functional — replace soon | | Brown/black residue around element area | Element failure with burn damage |

How We Replace the Heating Element

Step 1: Diagnosis

We run a diagnostic cycle and test the element's resistance with a multimeter. A healthy element reads 20–50 ohms depending on its wattage. An open-circuit element reads infinity; a shorted element reads zero.

Step 2: Access

On most front-loading washing machines (the standard type in Turkish homes), the heating element is accessed from the rear of the machine. We pull the machine away from the wall, remove the rear panel, and locate the element at the bottom rear of the drum.

For top-loading machines (less common in Turkey), access is from the front lower panel.

Step 3: Removal

We disconnect the electrical terminals, unscrew the element retaining bolt or unclip the element flange, and carefully remove the element. We also remove any limescale from the element seal area before fitting the new element.

Step 4: Fitting the New Element

We fit the correct replacement element (matching voltage, wattage, and physical dimensions) with a new rubber seal. We tighten the retaining bolt to the correct torque to ensure a watertight seal.

Step 5: Test

We run a 60°C wash cycle to verify the element heats correctly and the machine drains and spins normally after the heated wash.

Heating Elements for Popular Brands in Mersin

| Brand | Element Size | Common Wattage | |-------|-------------|----------------| | Bosch / Siemens | Ø39mm flange | 2,000 W | | Arçelik | Custom flange | 1,900 W / 2,200 W | | Beko | Ø39mm flange | 2,000 W | | Vestel | Custom flange | 1,900 W | | Indesit / Hotpoint | Ø39mm flange | 1,850 W | | Samsung / LG | Custom flange | 2,000 W |

We carry elements for all major brands. For less common models, parts can be sourced within 24 hours from Mersin supplier networks.

Limescale and Heating Element Life in Mersin

Mersin's water supply has a moderate hardness level. Limescale deposits on the heating element surface act as an insulator, causing the element to overheat and fail prematurely. In areas with harder water, elements may last only 3–4 years.

Prevention: Use an anti-limescale product (such as Calgon or Sana) according to the manufacturer's recommendation, and run a maintenance wash at 90°C with white vinegar or specialist descaler every 2–3 months.

Is It Worth Repairing?

For machines less than 8 years old in otherwise good condition, yes — absolutely. A heating element replacement at ₺350–₺600 is a small fraction of the cost of a new washing machine (₺5,000–₺25,000 for equivalent models in 2026). We will always give you an honest assessment.

Prices

| Service | Price | |---------|-------| | Heating element diagnosis | From ₺200 | | Heating element replacement (standard brands) | From ₺350 | | Heating element replacement (premium brands) | From ₺500 | | Combined element + thermistor replacement | From ₺500 | | Limescale descaling service | From ₺200 |

Labour and standard replacement parts included. Premium OEM parts at cost. VAT included.

FAQ

Can I replace the heating element myself?

Technically yes, but it involves disconnecting mains electrical connections and accessing parts of the machine that could cause water damage if incorrectly reassembled. We recommend professional replacement for safety and to ensure the seal is fitted correctly.

My washing machine trips the breaker even on cold wash cycles. Is this still the heating element?

If it trips on cold washes, the fault is likely elsewhere — possibly the motor, wiring, or pump. We will diagnose the specific fault before recommending any parts replacement.

How long does the repair take?

30–45 minutes for most front-loading machines. We can usually complete the repair and run a test cycle in under 90 minutes total.

Can you also replace the door seal while you are here?

Yes. Door seal (körük) replacement is another common job we do on the same visit. Combined heating element + door seal replacement: from ₺600.

Do you come on the same day?

Yes, in most cases. We have technicians available across all Mersin districts during normal hours and on-call for evenings.

Contact

Book your washing machine repair today — most parts in stock.

📞 (0 551) 711 93 55 | WhatsApp: wa.me/905517119355

For water heater and hot water system repairs in Mersin, visit mersinsofben.com. For electrical work in your home, see mersinelektrikcisi.com.